[<<]Message[>>]    [<<]Author[>>]    [<<]Subject[>>]    [<<]Thread[>>]

Number   :  529
Date     :  2001-08-05
Author   :  plumb_bob_1@y...
Subject  :  Re: xxcopy and FAT
Size(KB) :  0


Thanks for the reply MM!

I'm afraid I didn't describe my process very well..I'll try again

PC #1 Win98, FAT32
PC #2 Win95A FAT16

I used xxcopy /clone to clone the boot drive on PC#1 to a secondary 
HD (D:) on PC #2 over the LAN. The copying process seemed to go well, 
but when I removed the HD from PC #2 and placed it in PC#1, it 
wouldn't boot, although the system recognizes the drive. I finished 
off with the recommended fdisk to set the primary partition active, 
and the recommended fdisk /mbr. I also tried your suggestion of sys 
c:, but still no boot.

frank



This message if part of XXCOPY's message Archive.
The archive contains all the messages posted at Yahoo!Groups: XXCOPY.