[<<]Message[>>]    [<<]Author[>>]    [<<]Subject        [<<]Thread    

Number   :  1602
Date     :  2002-02-15
Author   :  Bob Weir
Subject  :  Re: xxcopy/logical block addressing and mbr
Size(KB) :  0


Chasm,
suggestions from another novice: -
1) check the start sequence in the BIOS
2) check that your 20GB is jumpered master.
3) use a floppy to start up and use fdisk to check that the primary HD
partition is still set active
(setting it may need the LS120 to be unplugged)
4) try changing over the HD and the LS120 on the end and middle connectors
of the IDE1 cable.
5) use fdisk /mbr (assuming that C has been recognised by the BIOS)

Hope that includes something you have not already tried!

Bob Weir


---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.277 / Virus Database: 146 - Release Date: 05 Sep 2001



This message if part of XXCOPY's message Archive.
The archive contains all the messages posted at Yahoo!Groups: XXCOPY.