[<<]Message[>>]    [<<]Author        [<<]Subject        [<<]Thread    

Number   :  2591
Date     :  2002-08-02
Author   :  9hammer
Subject  :  Re: Newbie - Using xxcopy /clone to backup C to D - using task scheduler
Size(KB) :  0


--- In xxcopy@y..., Kan Yabumoto  wrote:> 
>
> Nearly *ALL* user prompts can be disabled. But, you need to
> learn which switch does the job.
> 
> http://www.xxcopy.com/xxcopy27.htm#tag_320
> 
> If you don't know which one to use, just let XXCOPY
> display the warning prompt, then type ? and you will
> find a short answer on which switch is appropriate to
> suppress the particular switch.
> 
> Kan Yabumoto
> ==============================================================
> Thanks Yan... I have read (but certainly not digested) tag_320 as
mentioned above. I will print that out and try to sort out the basics
and follow that document as close as I can. I'm sure that I will make
many more "first time user" errors, but I will learn by my mistakes.

Thanks again Yan ...

Howard 



This message if part of XXCOPY's message Archive.
The archive contains all the messages posted at Yahoo!Groups: XXCOPY.