[<<]Message[>>]    [<<]Author[>>]    [<<]Subject[>>]    [<<]Thread[>>]

Number   :  3183
Date     :  2002-12-02
Author   :  Kan Yabumoto
Subject  :  Re: any issues with USB 2.0 drive?
Size(KB) :  1


Jim:

I believe the fatal error was from v2.82.6 which should be gone from
the newer one.

Sorry for causing your anxiety.

Kan Yabumoto
=====================================================================

At 2002-12-02 16:40, you wrote:
>I just bought a (1) USB2 drive kit, that lets you put a IDE drive in an
>external enclosure, and use it as a USB2 storage device; and (2) a 160GB
>Western Digital hard drive. I put (2) inside of (1), and tried using
>XXCOPY to /CLONE files from my C: drive to the "USB2 drive". Every
>time, it terminated with a "fatal error" reported by XXCOPY.
>
>Does XXCOPY have any known problems with this kind of arrangement?
>
>Of course, the problem could be anywhere - my USB 2.0 card/drivers, my
>USB cable, the IDEUSB hardware inside the box. Also there is the
>137GB limit to be concerned with. I set the "EnableBigLba" registry
>value to enable a single 160GB partition, but then my USB kit said that
>USB2 supports only up to 127GB. So I repartitioned, still got the fatal
>error from XXCOPY. I was running 2.82.6.
>
>Also - I did get the message from XXCOPY that a DLL had changed, etc.
>etc. "A new Operating System environment is detected".
>
>Just downloaded 2.82.7. Will try that.
>
>Any ideas? If I can't get this USB2 drive kit working reliably, I still
>have a few days to return it!
>
>jim



This message if part of XXCOPY's message Archive.
The archive contains all the messages posted at Yahoo!Groups: XXCOPY.