[<<]Message[>>]    [<<]Author[>>]    [<<]Subject[>>]    [<<]Thread[>>]

Number   :  7223
Date     :  2004-02-08
Author   :  Dan Anderson
Subject  :  Re: XXCLONE Lock Up Solved, Will NOT Boot
Size(KB) :  1


Rodney,

I'm not sure what you meant when you said that you loaded and ran xxclone
from the A: drive, but some things to consider are the following when you
run xxclone:

1. boot up into the XP partition that will be your source partition for the
xxclone run (don't run xxclone from a floppy drive - if that is possible at
all),

2. was your xxclone destination (target) drive the first primary partition
on the new hard drive?

Anything unusual about your system configuration? Multi-boot?


Dan

=========================


----- Original Message -----
From: "Rodney" 
To: 
Sent: Sunday, February 08, 2004 9:46 AM
Subject: [xxcopy] XXCLONE Lock Up Solved, Will NOT Boot


> Thanks to everyone that has been helping me, I have solved the lock
> up Problem. It was caused by an old program My son loaded and
> removed. (Easy CD Creator) Went into the Reg and removed the upper
> and lower filter left behind by this program.
> Now a NEW problem: I have loaded and ran XXCLONE from the A:
> drive. Choosing the first option ( Full backup make bootable) the
> program ran flawlessly. A window popped up saying it was complete
> and the new drive could Boot all by itself. After switching the
> drives and making sure the new drive was set as MASTER. I Get the
> following :
> A File is Missing or Corrupted C:\HIMEM.SYS
> A File is Missing or Corrupted C:\DBLBUFF.sys
> A File is Missing or Corrupted C:\IFSHLP.sys
> A File is Missing or Corrupted WIN.COM
>
> I Have put things back to the original configuration and tried to use
> XXCOPY, Transfer the reg without back up , Repair the Boot sector .
> Nothing works. Anyone have any Ideas as to what the problem is?



This message if part of XXCOPY's message Archive.
The archive contains all the messages posted at Yahoo!Groups: XXCOPY.